![]() The mainspring strut on a 92 FS will not fall out. If you press down on a firm surface with the lanyard loop to press in a bit on the mainspring cap, you can usually just push the pin out with light pressure. The solid pins used on the US made pistols are slightly "dog boned". How To Install A Beretta 92/M9 D Spring (HD) If you are going to replace it with a solid pin, you can use any old punch. For the Italian pistol you will need to drive out the roll pin. Order a dog bone pin from Brownells ahead of time so you don't need to put the roll pin back in. Originally posted by PGT: The only thing that's tricky about a D-spring swap is if your guns are made in Italy as they use a roll pin vs. With US made 92's, I can swap a D spring by only taking one grip off and no tools beyond that. The only thing that's tricky about a D-spring swap is if your guns are made in Italy as they use a roll pin vs. You can only control what you can control. No need to thread it or lock it into any holes. You'd have to try real hard to mess this up. I'd rather be hated for who I am than loved for who I'm not. Threaded on the tab? Pushed against it? Thanks in advance. Was said that the spring needs to be against the tab. Where the spring gets put back in, there's a tab and they showed a good picture of it. I watched a YouTube video and it seems pretty easy but I have a question. ![]() ![]() I have 2 new Berettas headed my way with D springs that need to be installed. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
January 2023
Categories |